|
|
|
You are here: Home >
Gefen TV GTV-WIRELESSHD Wireless HDMI 1080p 100 ft. Extender
 Write a Review
Standard Ships 2-5 Days. Priority Usually Ships 1-2 Days.
List Price: £830.00
Our Price: £747.00 (Excl. VAT)
Product Code: GEF-GTV-WIRELESSHD 
The GefenTV Wireless for HDMI Extender sends 1080p to any HDTV display up to 100 feet (30m) away.
The Wireless for HDMI Extender extends HDMI AV content from satellite
boxes, Blu-Ray players, and other AV sources to remote HDMI-compliant
display(s). The Wireless for HDMI Extender transmits through walls and
does not require line-of-sight placement of transceivers for good
reception.
HDMI-compliant displays can be placed up to 100 feet (30 meters) away
from HDMI sources. Video resolutions of up to 1080p@30 Hz or 1080i@60 Hz
are supported along with 5.1-channel digital audio and 2-channel analog
audio. Broadcast mode allows extension of HDMI without HDCP encoding to
up to 5 remote displays. Unicast mode extends HDMI with HDCP encoding
to a single remote display.
How It Works
The GefenTV Wireless for HDMI Extender uses one Sender unit and one or
more Receiver units. A short cable connects the HDMI input of the Sender
unit to the HDMI output of an HDMI source. At the display side, a short
cable connects the HDMI output of the Receiver unit(s) to the HDMI
input of the HDTV display(s). The HDMI signal from the HDMI source
travels to the HDMI display(s) over 5 GHz radio waves, and a vibrant and
crisp High Definition picture emerges on the HDTV display(s). Two
channels of L/R analog audio are available on the output of the Receiver
unit for connection to an external amplifier if desired (as RCA jacks).
Note:
Multi-channel Audio:Compressed 5.1-channel digital bitstream audio
(embedded in HDMI) and 2-channel LPCM analog audio (active on the RCA
outputs) are output by each Receiver unit.
Broadcast Mode: HDCP (copy protection encoding) is not supported in
Broadcast mode. Unicast mode is fully HDCP compliant (displays must also
be HDCP compliant). Up to 5 remote receivers may be active
simultaneously. To initiate Unicast and Broadcast modes, Sender and
Receiver units need to be in the same mode (Unicast or Broadcast) for a
successful transmission. The power LED will be green (Unicast) or red
(Broadcast) on both Sender and Receiver units before the selected mode
can be initiated.
Link LED on Sender unit: 3 types of behavior will be observed: quick
blinking, slow blinking, and steady. A quick blinking LED means that the
Sender unit and Receiver unit are establishing the connection
(including the HDCP authentication) wirelessly. A slow blinking LED
means that the connection has been established and the audio/video is
about to be passed over from Sender to Receiver. A steady LED means that
full operation is established and there is a picture showing on the
destination display(s) connected to the Receiver(s).
Link LED of Receiver: There are 3 types of behavior: quick blinking,
slow blinking, and steady. A quick blinking LED means that the Sender
unit and Receiver unit are establishing the connection (including the
HDCP authentication) wirelessly. A slow blinking LED means that the
connection has been established and the audio/video is about to be
passed over from Sender to Receiver. A steady LED means that the Sender
and Receiver are in full operation with a picture showing on the
display(s) connected to the Receiver unit(s).
- Fully HDMI and HDCP compliant (Unicast mode only)
- Real-time uncompressed audio/video
- PCM Supported when using HDMI @ 32, 44.1 and 48 KHz
- Dolby™ 5.1 Surround Sound is embedded within the HDMI output stream
- Multiple remote extension locations (up to 5 maximum)
- Up to 100 feet line-of-sight wireless operation, uncompressed video
- Frequency band range: 5.1-5.8 GHz; HDMI v1.2a Compliant
- Resolutions: 640x480, 480i, 480p, 576i, 576p, 800x600, 1024x768, 720p, 1080i and 1080p@30Hz
- Operating temperature: 0 to 50 degrees C
- Operating humidity: 10% to 90% relative humidity, non-condensing
- Power Supply / Consumption: 5V DC Universal / 13W max (each power supply)
- Dimensions (Sender & Receiver) : 6.5" W x 1.5" H x 6.5" D
- Dimensions (Plastic Bases, Each) : 3.4" W x 0.8-1.1" H x 8.5" D
- Sender Connectors: HDMI input (Type A 19-pin female)
- Receiver Connectors: HDMI output (Type A 19-pin female), Analog Audio outputs (1 pair Left and Right RCA jacks)
- FCC Compliant Part 15
- Shipping Weight: 6.4 Kilos
noinfofound
Browse for more products in the same category as this item:
Wireless Video
|
|
|
|
