|
|
|
You are here: Home >
Teletest OZL7180 7" 2x 16:9 HD-SDI and Composite video Portable LCD Monitor
 Write a Review
Ships In 3-5 Days
List Price: £1,483.35
Our Price: £1,483.35 (Excl. VAT)
Product Code: OZL7180 ![]()
This LCD is designed for mounting on a broadcast camera or for giving to directors during shoots. It has a extremely bright, high quality screen with a very wide angle of view and exact scan, no overscan. The unit can be used to focus and colour balance with, even in bright sunlight.
INPUTS: There is one PAL & NTSC composite video input and passive broadcast loop through. The fitted HD SDI, expansion card provides two HD SDI inputs and one HD SDI output. The SDI inputs are dual rate inputs.
ASPECT RATIO FORMATS: The image can be seen in 4/3, 16/9 mode and all controls can be switched from the front or via the remote control socket at the rear.
POWER: The unit can be powered by most broadcast batteries using optional adapters and has a very useful low battery indicator. It can also be powered by 11-30VDC from a camera or a mains PSU.
MOUNTING: Almost anywhere using the ¼" Whitworth screw threads on the unit and the stand.
ACCESSORIES: Among many, the optional carry case has a built in sunhood and splash proof screen.
7" 16/9 TFT LCD
PAL, NTSC, SDI, HDSDI
4/3 & 16/9 formats
Very high brightness
Rugged build
Battery powered
| Screen size | 7" (154x86mm) | | Aspect ratio | 16/9 | | Format control | 4/3, 16/9, (3D and 3D B/W option) | | Type of screen & dot pitch | TFT active matrix, xxx | | Resolution | 1,152,000 pixels (800x480x3) | | Brightness | 1200 - 1400 Cd/m² (NITs) | | Contrast | 600:1 | | Backlight | LED | | Protective screen | 3mm toughened, scratch resistant GLASS, anti glare finish | | Viewing angles | 60° left, 60° right, 40° top, 55° bottom | | Picture controls | Colour, contrast, brightness, tint & sharpness; normal, mirror & flip | | Safe area line generator | - | | HD Focus Assist | - | | Analogue video inputs | 2 x PAL & NTSC (auto switching) | | Analogue video outputs | 2 x broadcast high impedence loop throughs (works when power is off) | | Digital video inputs | 1 or 2 x HD SDI 50/60Hz dual rate (optional) | | Digital video outputs | 1 x HD SDI 50/60Hz dual rate (optional) | | Video connectors | 5 x unbreakable BNC sockets | | Radio link | 5.8 GHz 7 channel, video & 2 channel audio and video output (optional) | | RF antenna connector | SMA socket; 1 x 150mm R/A antenna (with optional radio link) | | Audio inputs | - | | Audio outputs | Headphone, 2 x 150mW @ 8 ohm speakers | | Audio connectors | 3.5mm jack socket | | Tally lights | Red, green & yellow LEDs | | Remote | RJ-45 socket, controlling all main functions | | Power consumption | 11-30VDC, 1.1A@12Vdc, 13.2 W; slide power switch | | DC connectors | XLR-4 plug (pin1= GND, pin4= +V); 4pin battery plug (see below) | | Batteries | 7.2-14VDC:Sony,Canon,JVC,PAG,IDX,Anton Bauer adapters(option) | | Low battery indicator | Flashing green power LED | | Temperatures | Operating -30°C to +70°C | | Housing | Black, "aircraft grade" unbreakable aluminium | | Mounting | ¼" Whitworth threads in the case & stand for tripod & camera mounts | | Dimensions | 172mm wide, 125mm high, 52mm deep (78mm inc connectors/knobs) | | Weight | 840g (1.05Kg with stand) | | Pixel perfection | It is unlikely, but there may be up to 3 imperfect pixels | | Cooling fan | Adjustable to come on at any temperature (factory set at +50°C) | | Battery adapter connector | 4pin plug (pin1= GND, pin2= +12V, pin3= N/C, pin4=+12V out) |
noinfofound
|
|
|
|
