A low cost, small 4/3 LCD monitor which is ideal for mounting on cameras or on sound trolleys. Although the screen is bright enough to be used in daylight and strong internal lighting, the optional sunhood will help viewing. All controls are push buttons and knobs on the front of the unit.CONNECTORS: The unit has a short break-out cable with a long extension that takes power and video signals. It is ideal for permanent wiring instalations yet can be removed very quickly if required.A/V INPUTS: The monitor has two selectable video and two stereo audio inputs. There are two 1W speakers for audio playback.POWER: Powered from 12V the unit can operate from sources such as the camera, a sound trolleys power supply, an optional 7.2V Li-ion battery adapter or mains PSU.MOUNTING: Using the º" Whitworth screw thread the unit can be mounted on a camera, using the stand supplied the unit can be mounted on a console / desk, or with the T slot on the rear it can be mounted flat against a panel; two units can be mounted side by side on a 4U high 19" rack panel.THIS PRODUCT IS NOT IDEAL FOR BROADCAST USE. SEE TELETEST'S OZLxxxx RANGE.

5.6" 4/3 TFT LCD PAL & NTSC 1W speakers

creen size 5.6" (117x82mm) Aspect ratio 4/3 Format control - Type of screen & dot pitch TFT active matrix, anti glare finish Resolution 224,640 pixels (320x234x3) Brightness 250 Cd/m? (NITs) Contrast 180:1 Backlight half life 10,000hrs Protective screen - Viewing angles 45? left, 45? right, 30? top, 10? bottom Picture controls Colour, contrast, brightness; mirror; volume (push & rotating controls) Safe area line generator - Analogue video inputs 2 x PAL & NTSC (auto switching) Analogue video outputs - Digital video inputs - Digital video outputs - Video connectors Yellow phono skt=video 1; brown phono skt=video 2 (break out cable) Radio link - RF antenna connector - Audio inputs 2 x 220mV line level Audio outputs 0.5W 8ohm internal loudspeaker Audio connectors Red phono skt= audio 1; white phono skt= audio 2 (break out cable) Tally lights - Remote - Power consumption 12VDC (11-30VDC), 500mA, 6W DC connectors 2.1mm DC socket (centre= positive) Batteries 7.2V Li-ion Sony, Canon & Panasoinic battery adapters (optional) Low battery indicator - Temperatures Operating -10?C to +65?C; storage -20?C to +85?C Housing Smart dark grey plastic casing Mounting º" Whitworth thread in the base of the case, T slot at rear Dimensions 148mm wide, 124mm high, 30mm deep Weight 400g Pixel perfection It is unlikely, but there may be up to 4 imperfect pixels Break out cable 8 pin "break-out" cable, 20cm; 350cm extension

noinfofound

Write a Review